BASIC STD SAW M249 KIT

Cost: $550 with free shipping!

Fixed stock as shown in the photo below

• Main Body Construction: Metal.

• Carrying handle: Polymer.

• Heat Shield: top barrel heat shield/ vent.

• Front carry handle: 3 position selection lock.

• Bi Pod: Made of steel & 3 position height adj.

• Front sight post: Adjustable up & down.

• Back sights: fully adjustable.

• These are all made from all steel high end Airsoft™  rifles.

• No other parts supplied or implied with kit.

• Typical ship time is two weeks from initial order due to high demand.

• Optional accessories shown in photo but are not included.

Indiana residents: must add 7% sales tax.

BASIC Para SAW M249 KIT

Cost: $550 with free shipping!

Collapsible (Para) stock as shown in photo below.

• Main Body Construction: Metal.

• Carrying handle: Polymer.

• Heat Shield: top barrel heat shield/ vent.

• Front carry handle: 3 position selection lock.

• Bi Pod: Made of steel & 3 position height adj.

• Front sight post: Adjustable up & down.

• Back sights: fully adjustable.

• These are all made from all steel high end Airsoft™ rifles.

• No other parts supplied or implied with kit.

• Typical ship time is two weeks from initial order due to high demand.

• Optional accessories available but are not included.

Indiana residents: must add 7% sales tax.

Barrel Threading Service: $45

Shipping: $12.00

Sales Tax: 7% (for Indiana Residents)

Note: Only original factory standard taper barrels will be threaded. Mail your original factory standard taper barrel postage pre-paid to us and we will thread it to 1/2"x28 on a metal lathe.

Indiana residents: must add 7% sales tax.

You may pay with any of the following:

• Personal check, (held until cleared).

• United States Postal money order.

• Certified bank check, (held until cleared).

• Indiana residents: must add 7% sales tax.

Send to:

KATHY LUALLEN     
1210 Spencer Pike Rd
Springville, IN 47462

 

PayPal Payment Method:

If you plan to purchase items using PayPal instead of your debit/credit card:

• Go to www.PayPal.com

• Log into your account.

• Select the "send money" option.

• Enter the email shown below.

• scoobybug@yahoo.com

• Indiana residents: must add 7% sales tax.

You do not have to have a PayPal account to use the "Add to Cart" button, but you do have to have a debit or credit card. Click proceed to checkout, then on the page that comes up. Look in the lower left hand corner, where it says don't have a Pay Pal account hit continue. Its that easy.

COMBO: BASIC Para SAW M249 KIT w/ Flash Hider & Mag Cover!

Cost: $595 with free shipping!

Collapsible (Para) stock as shown in photo below.

• Main Body Construction: Metal.

• Carrying handle: Polymer.

• Heat Shield: top barrel heat shield/ vent.

• Front carry handle: 3 position selection lock.

• Bi Pod: Made of steel & 3 position height adj.

• Front sight post: Adjustable up & down.

• Back sights: fully adjustable.

• These are all made from all steel high end Airsoft™ rifles.

Combo Includes:

1. BASIC PARA SAW M249

2. SAW Flash Hider.

3. SAW MAG Cover.

• No other parts supplied or implied with kit.

• Typical ship time is two weeks from initial order due to high demand.

• Optional accessories available but are not included.

Indiana residents: must add 7% sales tax.

 Universal 3 Point Sling: $20

 Shipping: Free

 Sales Tax: 7% (for Indiana Residents)

 Enhance the look and feel of your favorite weapon with this three point sling for your rifle or shotgun, etc.  This sling makes it easy and natural to carry and handle your weapon with ease, providing better control and stability to your shooting system.

• This universal kit comes with everything you need to fit virtually any rifle or shotgun.

• Weapon in photo not included.

 Indiana residents: must add 7% sales tax.

COMBO: Threaded Barrel and Flash Hider: $139

Shipping: Free

Sales Tax: 7% (for Indiana Residents)

Have you always wanted a threaded barrel?

Are you not sure how to remove your barrel?

Have you had second thoughts on mailing your barrel to someone for threading? Well now you don't have to.

We have the perfect solution for you, buy a pre-threaded barrel from us and receive a free SAW M249 flash hider for your barrel.

• We now have a limited number of, Ruger OEM 16 and 1/4" long, threaded 1/2" x 28 barrels.

• Barrels are Factory new Ruger 10/22 tapered barrels.

• Combo comes with barrels and with the famous 12 ported SAW M249 flash hider.

• Quantities are limited and subject to availability to stock on hand, so don't delay.

• Click on our Hints and Tips button for instructions on how to disassemble your Ruger 10/22, this can be easily done in just a couple of minutes. No special skills required.

Indiana residents: must add 7% sales tax.

Note: We are currently out of stock, check back often for updates!

BMG STYLE MUZZLE BRAKE  FOR M249 KIT: $100

Shipping: Free

Sales Tax: 7% (for Indiana Residents)

• Running with the big dogs, give your M249 Kit the look and feel of a larger caliber system with a functional flash hider.

• Great looking, intimidating and is sure to get anyone's attention in a hurry.

• Aluminum made BMG style flash hider for threaded barrels (will not work on non threaded barrels).

• Fits 1/2" X 28 threaded barrels.

• Paint finish rated at 1200°F

• BMG Flash Hider Kit comes with crush washers to allow you align your BMG Flash hider to your previously threaded barrel by third party sources.

  Note: for best results of a perfect fit/alignment please use our barrel threading service option.
   

• Orders shipped within 2 weeks once payment clears.
   

• Indiana residents: must add 7% sales tax.

Available Colors

Aluminum Finish $100.00 Desert Tan $100.00 Olive Drab $100.00 Matte Black $100.00 Satin Black $100.00

MK-2 Charger Pistol Stock Kit: $165

Shipping: Free

Sales Tax: 7% (for Indiana Residents)

Have you always wanted a short, highly controllable and comfortable charger pistol stock?

• Light weight.

• Easy to carry.

• Weather resistant.

• Color choices are:  Black or Camo (see photos below for Camo color & pattern).

• Kit comes with Mk-2 Charger stock and the all aluminum rail on the bottom.

Note: Optional equipment shown in photos (i.e. bipod) attached to charger stock which is not included in the kit  but can be purchased separately.
 

Indiana residents: must add 7% sales tax.

Top Rail Mounting Service: $50 + required calculated shipping charges.

Service offered for: SAWM249

Shipping: You ship your receiver top cover to T.I.G. at your own expense.

                   You pay calculated shipping from T.I.G. to your home address.

Sales Tax: 7% (for Indiana Residents)

Have you always wanted a top rail for your SAW M249?

A top rail allows an accessory to be mounted to your weapon.

• Scope (day light / night scope).

• Light (Halogen, LED, Infrared, etc.).

• Laser (Red or Green).

• small wireless TV Camera,

• etc.

Service includes:

1. Reworking your top receiver cover to accept rail system.

2. One Picatinny rail provided and mounted by T.I.G.

    

   Note: If you need a different type of rail, please email our technical support staff at Tigm249@gmail.com and one of our technicians will answer your question.

 In order to take advantage of this service:

Option # 1:

1. Remove your top receiver cover (i.e. two screws) at your own expense (do not loose screws).

2. Ship your receiver top cover to T.I.G. (see address top of page) at your own expense. We highly recommend that you send the item insured to cover any damage during transit or being lost in the mail system.

3. Be aware that we are not responsible for damaged  receiver top covers through either by your own removal and or installation and or from the USPS mail service to and from our place of business.

4. Click on the add to cart button to pay for item.

5. You must also add shipping costs one way from T.I.G. to your home.

6. If you are an Indiana resident, you must add a sales tax of 7% when paying for this item.

Option # 2:

1. When purchasing a new SAW M249 kit from TIG, select the rail system in the drop down menu below for this item. T.I.G. will mount the rail before shipping your SAW M249 stock.

  Indiana residents: must add 7% sales tax.

Buyer must add shipping costs from zip code 47462 to the buyers home!

COMING SOON

RUGER 10/22 SNIPER STOCK MK-1:

Designed and built in house at Tacticalimageguys.com

• Affordable pricing.

• Stock works on any standard factory Ruger 10/22 barrel system and will also work on bull barrel systems.

• Over 60 hrs Engineering Research and Development time invested with 15 hours on a 5 axis CNC machine.

• Quality built sniper stock with the features every precision shooter/expert wants and needs.

• Stock will last for many years to come.

• Impervious to weather conditions.

• Available in many colors (Gray (shorter stock), Matte Black, Satin Black, Olive Drab, Desert Tan, etc.).

• Comes with Tacticalimageguys.com logo on stock.

Estimated availability date: Feb, 2010.

Note: Stocks shown without butt pads.

STAY TUNED FOR MORE DETAILS

COMBO: BASIC STD SAW M249 KIT w/ Flash Hider & Mag Cover!

Cost: $595 with free shipping!

Fixed stock as shown in the photo below

• Main Body Construction: Metal.

• Carrying handle: Polymer.

• Heat Shield: top barrel heat shield/ vent.

• Front carry handle: 3 position selection lock.

• Bi Pod: Made of steel & 3 position height adj.

• Front sight post: Adjustable up & down.

• Back sights: fully adjustable.

• These are all made from all steel high end Airsoft™  rifles.

Combo Includes:

1. BASIC STD SAW M249

2. SAW Flash Hider.

3. SAW MAG Cover.

• No other parts supplied or implied with combo kit.

• Typical ship time is two weeks from initial order due to high demand.

• Optional accessories shown in photo but are not included.

Indiana residents: must add 7% sales tax.

GSG-5 SD front end fake suppressor : $210

Shipping: Free

Sales Tax: 7% (for Indiana Residents)

Note:  Comes with Forearm & Front End Fake suppressor.

Forearm:

• Attaches with one screw, and comes off just like the factory GSG-5 front assembly
  Forearm:

• Forearm (i.e. hand guard) made of fiber polymer and layer coated with an easy to grip rubber feel.

Fake Suppressor:

• Front end fake suppressor tube made of thick PVC with all steel front end piece, also rounded like the real SD Tube.

• Gun barrel extends completely through this suppressor to the end of the tube, so there is no expansion gases being exerted upon the PVC tube.

Note:  

• Your factory cocking tube on your GSG-5 must be sanded down a little to allow function in the GSG-5 SD front. Very easy to do and only takes 5 minutes.

• Please allow at minimum of 2 weeks turn around time.

Indiana residents: must add 7% sales tax.

 

SAW Flash hiders: $25

Shipping: Free

Sales Tax: 7% (for Indiana Residents)

• Aluminum body with 12 angled ports.

• 3 inches long, and coated in
  Mil spec color matte black.

• Internal 1/2 x 28 threads for
  barrels already threaded 1/2 x 28 only.
   

Indiana residents: must add 7% sales tax.

Archangel Bolt Buffers 5 pack : $10

Shipping: Free

Sales Tax: 7% (for Indiana Residents)

 

• Color blue.

•  Stop that metal to metal clack sound!

• Improves recoil.

• Improves optics life. 

Indiana residents: must add 7% sales tax.

 

Ammo Belt : $25

Shipping: $5.00

Sales Tax: 7% (for Indiana Residents)

• Ammo belt consists of Qty 15 Brass Shells & Links. 

• Ammo belt is purely for looks and is non-functional (inert) and adds to the aesthetic appeal of your SAW enhancing that battlefield look.

• Your Ruger 10-22 will still feed and function normally even with the dress up ammo belt attached.

• Magazine cover (green container) shown is a separate optional accessory which is not included with Ammo belt.

• Stock shown is not included with Ammo belt.

Indiana residents: must add 7% sales tax.

SAW MAG Cover: $65

Shipping: $7.00

Sales Tax: 7% (for Indiana Residents)

• The SAW Mag cover is the green box you see in the photo and is used to hold your Ammo belt, which greatly adds to the look of your SAW.

• SAW Mag cover shown in photos is shown with optional accessories attached that are not included.

Indiana residents: must add 7% sales tax.

Note: Please email before ordering, as quantities are currently, very limited on the SAW MAG COVER!