Be sure to check out our COMING SOON announcement at the bottom of the page.

 

Quantities are limited and subject to our stock availability, so please order now.

 

 

Check out what The Range Reviews: Tactical has to say about us!

 

Note: Unless otherwise stated all SAW M249 parts and or kits are adapted for the Ruger 10/22 using high end Airsoft™  parts.

 

 

BASIC STD SAW M249 KIT Cost: $500 with free shipping! Fixed stock as shown in the photo below Main Body Construction: Metal. Carrying handle: Polymer. Heat Shield: top barrel heat shield/ vent. Front carry handle: 3 position selection lock. Bi Pod: Made of steel & 3 position height adj. Front sight post: Adjustable up & down. Back sights: fully adjustable. These are all made from all steel high end Airsoft™ rifles. No other parts supplied or implied with kit. Typical ship time is two weeks from initial order due to high demand. Optional accessories shown in photo but are not included. Note: Due to current global economics, material shortages for stocks are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com	BASIC Para SAW M249 KIT Cost: $500 with free shipping! Collapsible (Para) stock as shown in photo below. Main Body Construction: Metal. Carrying handle: Polymer. Heat Shield: top barrel heat shield/ vent. Front carry handle: 3 position selection lock. Bi Pod: Made of steel & 3 position height adj. Front sight post: Adjustable up & down. Back sights: fully adjustable. These are all made from all steel high end Airsoft™  rifles. No other parts supplied or implied with kit. Typical ship time is two weeks from initial order due to high demand. Note: Due to current global economics, material shortages for stocks are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax.   Email: Blinking77@gmail.com	You may pay with any of the following: Personal check, (held until cleared). United States Postal money order. Certified bank check, (held until cleared). Indiana residents: must add 7% sales tax. Send email for more ordering information to :   Email: Blinking77@gmail.com Indiana residents: must add 7% sales tax. Questions? Please email our technical support staff at Email: Blinking77@gmail.com
COMBO: BASIC STD SAW M249 KIT w/ Flash Hider & Mag Cover! Cost: $575 with free shipping! You Save $25 off of our already low sale prices! Fixed stock as shown in the photo below Main Body Construction: Metal. Carrying handle: Polymer. Heat Shield: top barrel heat shield/ vent. Front carry handle: 3 position selection lock. Bi Pod: Made of steel & 3 position height adj. Front sight post: Adjustable up & down. Back sights: fully adjustable. These are all made from all steel high end Airsoft™ t rifles. Combo Includes: BASIC STD SAW M249 SAW Flash Hider. SAW MAG Cover. No other parts supplied or implied with combo kit. Typical ship time is two weeks from initial order due to high demand. Optional accessories shown in photo but are not included. Note: Due to current global economics, material shortages for stocks are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com	COMBO: BASIC Para SAW M249 KIT w/ Flash Hider & Mag Cover! Cost: $575 with free shipping! You Save $25 off of our already low sale prices! Collapsible (Para) stock as shown in photo below. Main Body Construction: Metal. Carrying handle: Polymer. Heat Shield: top barrel heat shield/ vent. Front carry handle: 3 position selection lock. Bi Pod: Made of steel & 3 position height adj. Front sight post: Adjustable up & down. Back sights: fully adjustable. These are all made from all steel high end Airsoft™  rifles. Combo Includes: BASIC PARA SAW M249 SAW Flash Hider. SAW MAG Cover. No other parts supplied or implied with kit. Typical ship time is two weeks from initial order due to high demand. Note: Due to current global economics, material shortages for stocks are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com	Universal 3 Point Sling: $20  Shipping: Free  Sales Tax: 7% (for Indiana Residents)    Enhance the look and feel of your favorite weapon with this three point sling for your rifle or shotgun, etc.  This sling makes it easy and natural to carry and handle your weapon with ease, providing better control and stability to your shooting system. This universal kit comes with everything you need to fit virtually any rifle or shotgun. Weapon in photo not included.    Indiana residents: must add 7% sales tax.    Email: Blinking77@gmail.com
Ammo Belt : $25 Shipping: $5.00 Sales Tax: 7% (for Indiana Residents)   Ammo belt consists of Qty 15 Brass Shells & Links.  Ammo belt is purely for looks and is non-functional (inert) and adds to the aesthetic appeal of your SAW enhancing that battlefield look. Your Ruger 10-22 will still feed and function normally even with the dress up ammo belt attached. Magazine cover (green container) shown is a separate optional accessory which is not included with Ammo belt. Stock shown is not included with Ammo belt. Note: Due to current global economics, material shortages are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com	SAW MAG Cover: $65 Shipping: $7.00 Sales Tax: 7% (for Indiana Residents)   The SAW Mag cover is the green box you see in the photo and is used to hold your Ammo belt, which greatly adds to the look of your SAW. SAW Mag cover shown in photos is shown with optional accessories attached that are not included. Note: The SAW MAG cover only works with the MWG 50 round tear drop magazine which is not included. Note: Due to current global economics, material shortages are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com	SAW Flash hiders: $25 Shipping: Free Sales Tax: 7% (for Indiana Residents)   Aluminum body with 12 angled ports. 3 inches long, and coated in Mil spec color matte black. Internal 1/2 x 28 threads for barrels already threaded 1/2 x 28 only.   Note: Due to current global economics, material shortages are now being felt in all industries including ours. Our quantities are now very limited and we highly recommend that you email us first, before placing an order to check our current inventory levels. We are looking for a global material recovery sometime in April. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com

 

 

COMBO: Threaded Barrel and Flash Hider: $139   Shipping: Free Sales Tax: 7% (for Indiana Residents)   Have you always wanted a threaded barrel?   Are you not sure how to remove your barrel?   Have you had second thoughts on mailing your barrel to someone for threading? Well now you don't have to.   We have the perfect solution for you, buy a pre-threaded barrel from us and receive a free SAW M249 flash hider for your barrel. We now have a limited number of, Ruger OEM 16 and 1/4" long, threaded 1/2" x 28 barrels. Barrels are Factory new Ruger 10/22 tapered barrels. Combo comes with barrels and with the famous 12 ported SAW M249 flash hider. Quantities are limited and subject to availability to stock on hand, so don't delay. Click on our Hints and Tips button for instructions on how to disassemble your Ruger 10/22, this can be easily done in just a couple of minutes. No special skills required.         Indiana residents: must add 7% sales tax.   Email: Blinking77@gmail.com

Barrel Threading Service : $45   Shipping: $12.00 Sales Tax: 7% (for Indiana Residents)   Need your factory standard barrel threaded?     Note: Only original factory standard taper barrels will be threaded. Mail your original factory standard taper barrel postage pre-paid to us and we will thread it to 1/2"x28 on a metal lathe.     Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com

 

 

 

MK-2 Charger Pistol Stock Kit: $165   Shipping: Free Sales Tax: 7% (for Indiana Residents)   Have you always wanted a short, highly controllable and comfortable charger pistol stock? Light weight. Easy to carry. Weather resistant. Color choices are:  Black or Camo (see photos below for Camo color & pattern). Kit comes with Mk-2 Charger stock and the all aluminum rail on the bottom.   Note: Optional equipment shown in photos (i.e. bipod) attached to charger stock which is not included in the kit  but can be purchased separately.                             Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com

Top Rail Mounting Service: $50 + required calculated shipping charges. Service offered for: SAWM249   Shipping: You ship your receiver top cover to T.I.G. at your own expense.                    You pay calculated shipping from T.I.G. to your home address.   Sales Tax: 7% (for Indiana Residents)     Have you always wanted a top rail for your SAW M249?   A top rail allows an accessory to be mounted to your weapon. Scope (day light / night scope). Light (Halogen, LED, Infrared, etc.). Laser (Red or Green). small wireless TV Camera, etc. Service includes: Reworking your top receiver cover to accept rail system. One Picatinny rail provided and mounted by T.I.G.   Note: If you need a different type of rail, please email our technical support staff at Tigm249@gmail.com and one of our technicians will answer your question.  In order to take advantage of this service:   Option # 1: Remove your top receiver cover (i.e. two screws) at your own expense (do not loose screws). Ship your receiver top cover to T.I.G. (see address top of page) at your own expense. We highly recommend that you send the item insured to cover any damage during transit or being lost in the mail system. Be aware that we are not responsible for damaged  receiver top covers through either by your own removal and or installation and or from the USPS mail service to and from our place of business. Click on the add to cart button to pay for item. You must also add shipping costs one way from T.I.G. to your home. If you are an Indiana resident, you must add a sales tax of 7% when paying for this item. Option # 2: When purchasing a new SAW M249 kit from TIG, select the rail system in the drop down menu below for this item. T.I.G. will mount the rail before shipping your SAW M249 stock.   Indiana residents: must add 7% sales tax. Buyer must add shipping costs from zip code 47462 to the buyers home! Email: Blinking77@gmail.com

 

GSG-5 SD front end fake suppressor : $210 Shipping: Free Sales Tax: 7% (for Indiana Residents) Note:  Comes with Forearm & Front End Fake suppressor. Forearm: Attaches with one screw, and comes off just like the factory GSG-5 front assembly Forearm: Forearm (i.e. hand guard) made of fiber polymer and layer coated with an easy to grip rubber feel.   Fake Suppressor: Front end fake suppressor tube made of thick PVC with all steel front end piece, also rounded like the real SD Tube. Gun barrel extends completely through this suppressor to the end of the tube, so there is no expansion gases being exerted upon the PVC tube. Note:   Your factory cocking tube on your GSG-5 must be sanded down a little to allow function in the GSG-5 SD front. Very easy to do and only takes 5 minutes. Please allow at minimum of 2 weeks turn around time. Indiana residents: must add 7% sales tax. Email: Blinking77@gmail.com

 

 

COMING SOON             STAY TUNED FOR MORE DETAILS